設為首頁收藏本站

黑皮論壇(手機維修/電玩維修/電腦維修)

 找回密碼
 立即註冊
查看: 3273|回復: 8

[系統設定] FLASH裡的launch.ini 不見了

[複製鏈接]
發表於 2012-3-14 11:19:54 | 顯示全部樓層 |閱讀模式
請問這個檔案不見了要怎再裝回去?如果要設置FSD可以連線,但XBOX系統禁止連線的話,要怎麼設定呢?
發表於 2012-3-15 18:36:34 | 顯示全部樓層
那個檔不一定要在flash裏可以放hdd1:\

刷dashlaunch預設值就是禁止live連線了。
liveblock = true
 樓主| 發表於 2012-3-17 00:49:09 | 顯示全部樓層
可是我主機裡完全沒有那個launch.ini 的檔案存在了,要去哪找?
發表於 2012-3-17 01:08:57 | 顯示全部樓層
starlight322 發表於 2012-3-17 00:49
可是我主機裡完全沒有那個launch.ini 的檔案存在了,要去哪找?

去下載dash_launch,裡面有的樣子
發表於 2012-3-17 02:07:25 | 顯示全部樓層
starlight322 發表於 2012-3-17 00:49
可是我主機裡完全沒有那個launch.ini 的檔案存在了,要去哪找?

完全沒有就是都用預設值, 要設定的話用記事本開個launch.ini檔設定好放hdd1就可以了
 樓主| 發表於 2012-3-18 23:51:35 | 顯示全部樓層
那請問裡面有哪些東西要輸入呢?能不能給個範本,謝謝。
發表於 2012-3-19 01:07:13 | 顯示全部樓層
starlight322 發表於 2012-3-18 23:51
那請問裡面有哪些東西要輸入呢?能不能給個範本,謝謝。

; launch.xex V2.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk    Hdd:\
; usb memory stick      Usb:\
; memory unit           Mu:\
; USB memory unit       UsbMu:\
; big block NAND mu     FlashMu:\
; internal slim 4G mu        IntMu:\
; CD/DVD                Dvd:\     (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex

; example entry
; Default = Hdd:\FreeStyle\default.xex
[QuickLaunchButtons]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back  =
LBump =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default =

; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console, this item will be used instead of default
Power =

; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 =
plugin2 =
plugin3 =
plugin4 =
plugin5 =

[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true

; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = false

; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false

; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false

; when fatalfreeze is set to false, setting this to true will cause the box to reboot (hard reboot), setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false

; when fatalfreeze is set to false and fatalreboot is set to true, setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
safereboot = false

; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false

; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7FFF

; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false

; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false

; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false

; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false

; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true

; when set to true,  dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = false

; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true

; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
dumpfile =

; this value sets the number of times that buttons are checked for on bootup, as well as how long it checks for buttons
; and thus extends the length of time the boot animation will be displayed onscreen
; 0x5A is approximately 6s window for button detection, 0x2A approximately 2s - if set too short auto profile login breaks
; if set too long other wonky things happen
; note this value is interpreted as hexidecimal when preceded with 0x, valid range is 0 to 0xFFFFFFFF
; if not set this value will be put to 0x2A (42)
bootdelay = 0x2A

; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true

; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false

; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false

; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
; if not set this value will be FALSE
hddalive = false

; in seconds, the interval between when USB devices will be polled for "alive.txt" file
; if not set and hddalive is set to TRUE this value will be 210
hddtimer = 210

; attempts to disable popups related to signing in, like "live is blocked" and similar
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
; if not set this value will be FALSE
signnotice = false

; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false

; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false

; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true

; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = FALSE
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030


; all comments and fields in this file are optional, you can remove anything you don't need

; sorry for any double negatives :p

; njoy, cOz
發表於 2012-4-30 16:22:31 | 顯示全部樓層
从新用U盘拷一个进去就行了
發表於 2012-6-14 12:36:06 | 顯示全部樓層
用设定值
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

小黑屋|Archiver|黑皮維修站    

GMT+8, 2024-3-29 06:28 , Processed in 0.068239 second(s), 24 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表