黑皮論壇(手機維修/電玩維修/電腦維修)

標題: 9.6A 4G版『已經』可以改機，沒升級超過14719的可以帶來改了 [打印本頁]

作者: happytvgame 時間: 2012-9-5 10:49
標題: 9.6A 4G版『已經』可以改機，沒升級超過14719的可以帶來改了
4G已經成功合成15574自製系統可正常運作。

可以經由讀卡機讀取4g資料，並合成ecc取出cpukey，並改成最新的自製15574。
來源： http://team-xecuter.com/new-product-xecuter-4gb-usb-reader/

PDF文檔：http://www.mediafire.com/view/?0ij5cwra4d4lk28

SDTOOL: http://www.eurasia.nu/modules.ph ... ona_4G_SDTools_v1.5
含改機教學文件(pdf)

X360KEY已測試正常運作在liteon 1175光碟機
http://shop.happytvgame.com/product_info.php/products_id/1127

新版j-runner (281)已經可以直接製作4g自製系統
http://www.team-xecuter.com/forums/showthread.php?t=82434

Build 281

Added Xebuild 1.05
Added read/write to Corona 4GB using SD Card reader

Build 280

Added Corona Install Images
Added DIY Corona xsvf for 48MHZ Osc
Added Monitor COM wiring Images
Added Enable/Disable of File Checks/Downloads in Settings
Added app re-opens in same screen position as was last used
Changed Use of registry for settings (values are stored elsewhere)
Changed Settings layout
Changed Custom Functions layout
Changed Xsvf selection screen
Fixed Nand init after dash selection
Fixed Cpukeydb clipboard after a sort-by selection
Fixed RGH auto Selection for Trinity
Fixed Small bug in dashlaunch selection radio buttons
Fixed Bug where crash occurs if filepath no longer exists for working folder
Tidied up Images dropdown menus
Added warning of existing files in output folder on start
Added fcrt when extracting files
Fixed bug in Scan for keys

Build 279

Added support for Xebuild 1.04
Added support Corona ECC
Added COM port Monitor for Xell (additional wiring and HW required - you can use a CK3i or NAND-X USB Update Cable)
Added Demon Hotkeys
- F5 - toggle Demon Nand/Xbox360 Nand
- F6 - Power On Xbox360
- F7 - Power Off Xbox360
Added Scan Ip Range for CPU Key (range scanned is in settings page - default is LAN)
Added ability to change output name of images built (settings page - default: updflash.bin)

Build 278

added support for dashlaunch 3.02
added support for xebuild 1.03

Build 277

Added Team Xecuter DemoN support
- Read DemoN/Xbox360 nand
- Write DemoN/Xbox360 nand
- Erase DemoN/Xbox360 nand
- Write XSVF to CoolRunner
- Toggle Between Nands
- Power Console On/Off (Kiosk Pin wiring required)
- Update DemoN Firmware
Improvements to POST monitor
Improved nand initialization and ECC creation (faster)

Build 276

Added POST Monitor
Added routine to Write TX fusion nands (handles bad blocks)
Added Menus items, moved around to make more sense
Added option in settings for some users who were reporting JR-Programmer write 'lagging' (it should be similar to read speed)
Added ability to update / re-program the FW on JR-Programmer
Added Scan for keys/nands function in Key database
Added device connected notification images
Added CR Rev C pictures

Build 275

SMC config viewer
Extract files function now extracts all the required files for Fusion into output folder
Advertisement now opens in the user's specified browser and not Internet Explorer \o/
Added another warning message when users are about to dump nand thus replacing an existing file
A checksum.md5 is now generated on compare, dunno why its needed but someone asked for it
Enhanced bad block handling, now not only it remaps blocks to create ecc but it writes them in the correct position as well
Lots of optimizations

Build 274

added an additional xsvf file for falcons - rgh2

Build 273

fixed a bug when internet connection is active but server is down

Build 272

fixed a bug with rgh2 and dashlaunch

Build 271

added support for xebuild 1.02
added support for dashlaunch 3.00
fixed a few bugs

Build 270

fixed a typo on ecc creation for 6752

Build 269

fixed incompatibility error on XP

Build 268

Layout change
added RGH2 support for 14717 > phats
added RGH2 Wiring images
added RGH2 xsvf files
added ARM 2 support
added Xecuter J-R Programmer support
added LPT support (for coolrunner programming only)
added Xebuild options editing screen
added sounds on Success and Failure conditions (editable)
added Xell-Reloaded on JTAG - for HDMI support during CPU key retrieval etc
added bad blocks tab for full check of bad blocks
added .dll usage
added support for updating jtags of any wiring (creating aud_clamp, Open_tray updated images etc)
added new icon
added reporting console LDV in log during CpuKey grab over network
removed Xellous use on JTAG
improved update method
improved advanced nand/CR functions in
improved changelog retrieval
some minor bug fixes

Build 267

added an option to use a different bootloader on xenons as there have been reports it improves the glitch times

Build 266

added Xenon Support

Build 265

a file path fix

Build 264

added support for ecc creation on trinity with dash version 14717 and above

Build 263

added auto file save for those who are doing purely dvd key retrieval!
a couple of tiny tweaks
new dashlaunch option - fakelive

Build 262

added KV info extraction

Build 261

small bug with launch.ini where some values were set to true
more idiot proof. removed the pop up at start of reading

Build 260

added status updates on xebuild and dashlaunch
added support to add dashes offline

Build 259

fixed the actual issue on nands that need donor files

Build 258

added 14719 (and dash selector)
fixed a dashlaunch issue
fixed (a possible issue) on nands that need donor files

Build 257

fixed a problem with changing ldv

Build 256

Initial Release

作者: shyhjong 時間: 2012-9-6 22:13
請問250G不小心更新到15574，可有可改機資訊謝謝

作者: FENGLI 時間: 2012-9-6 22:57

shyhjong 發表於 2012-9-6 22:13
請問250G不小心更新到15574，可有可改機資訊謝謝

你好!! 還要再等等喔目前無法 3Q

作者: 陳春富 時間: 2012-9-11 10:50
本帖最後由陳春富於 2012-9-11 10:59 編輯

請問黑大此款4G版改自制之後內置硬碟可改至1TB嗎?
還是只能使用外置硬碟呢?還有就是開機需多久?(系統版本13599，2012出廠，電源9.6A)

作者: kane211289 時間: 2012-9-11 11:14

陳春富發表於 2012-9-11 10:50
請問黑大此款4G版改自制之後內置硬碟可改至1TB嗎?
還是只能使用外置硬碟呢?還有就是開機需多久?(系統版本13 ...

可以把內制硬碟換成1T喔.開機時間大概是30秒~1分鐘

給您參考

作者: psbox 時間: 2012-9-11 16:16
請問這裡所謂的自製是一般的自製還是脈衝自製?
4G版的不是之前就可以改脈衝自製了嗎?
有點不太懂
那如果要改的話,費用要多少?謝謝

作者: kane211289 時間: 2012-9-11 16:23
是9.6A跟10.83A的不同喔.出場日也不同

所以這次的破解是9.6A 14719以下可以改自製

自製還是脈衝自製?基本上他們是一樣的東西

費用的話要看您主機幾月出廠的喔.還有一定要沒升級到15574才可以改

謝謝您

作者: leeson 時間: 2012-9-28 23:54
黑皮大請問一下，10.83A就不能改了嗎

4g 10.83a 14719<--------這可以改自制了嗎???

作者: leeson 時間: 2012-9-28 23:55
出廠日是2011-3-11

作者: happytvgame 時間: 2012-9-29 17:45

leeson 發表於 2012-9-28 23:54
黑皮大請問一下，10.83A就不能改了嗎

4g 10.83a 14719

這樣可以改自製哦！不要再升上去到15574

歡迎光臨黑皮論壇(手機維修/電玩維修/電腦維修) (http://www.happytvgame.com/)